Users Guide

stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all
stack-unit.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information
This feature allows you to determine if the CAM has enough space available before
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map rules
are ignored and only the Trust rule is programmed in the CAM. In such an instance, the
Estimated CAM output column contains the size of the CAM space required for the
Trust rule and not the Class-map rule.
The following describes the test cam-usage service-policy input policy-
map stack-unit
command shown in the following example.
Field Description
stack-unit Indicates the stack-unit slot number.
Portpipe Indicates the portpipe number.
CAM Partition The CAM space where the rules are added.
Available CAM Indicates the free CAM space, in the partition, for the
classification rules.
NOTE: The CAM entries reserved for the default rules are
not included in the Available CAM column; free entries,
from the default rules space, cannot be used as a policy
map for the classification rules.
Quality of Service (QoS) 1464