Users Guide

defined. This command enables the qos-policy-output configuration mode—(conf-
qos-policy-out).
Related
Commands
• bandwidth-percentage — assigns percentage of bandwidth to the class/queue.
• wred — assigns yellow or green drop precedence.
rate-police
Specify the policing functionality on incoming traffic.
S6000–ON
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-
rate [burst-KB]]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). Make the following value a multiple of 64. The
range is from 0 to 40000000. The default granularity is Megabits
per second (Mbps).
committed-rate Enter the bandwidth in Mbps. The range is from 0 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 16 to
200000. The default is 100.
peak peak-rate (OPTIONAL) Enter the keyword peak then a number to specify
the peak rate in Mbps. The range is from 0 to 40000. The default
is the same as designated for committed-rate.
Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate.
Granularity for committed-rate and peak-rate is Mbps unless you use the kbps
option.
Command Modes QOS-POLICY-IN
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Quality of Service (QoS) 1444