Users Guide

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.1.9.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
Usage Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given
to all eight classes exceeds 100%, the bandwidth percentage automatically scales down
to 100%.
Related
Commands
• qos-policy-output — creates a QoS output policy.
buffer-stats-snapshot
Enable the buffer statistics tracking utility and enter the Buffer Statistics Snapshot configuration mode. You
must enable this utility to be able to configure the parameters for buffer statistics tracking.
Syntax
[No] buffer-stats-snapshot
To disable the buffer statistics tracking utility, enter the disable command from the
BUFFER-STATS-SNAPSHOT mode.
Default By default, buffer statistics tracking is disabled.
Command Modes CONFIGURATION mode
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Quality of Service (QoS) 1425