Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
If traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much
less than the value configured.
On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for some
values, the shaped rate is much less than the value configured.
NOTE: When packets of size greater than 7000 bytes are expected to be received
from the network, Dell Networking recommends that you configure the burst
value to be more than 175 KB if you configured the rate shape. Such a setting
ensures proper bandwidth sharing across queues.
Related
Commands
• rate-shape — shapes traffic output as part of the designated policy.
service-class dynamic dot1p
Honor all 802.1p markings on incoming switched traffic on an interface (from INTERFACE mode) or on all
interfaces (from CONFIGURATION mode). A CONFIGURATION mode entry supersedes an INTERFACE mode
entry.
S6000–ON
Syntax
service-class dynamic dot1p
Quality of Service (QoS) 1422