Users Guide

Version Description

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.1 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series and S-Series.

Usage Information Guarantee a minimum bandwidth to different queues globally using the service-

class bandwidth-percentage command from CONFIGURATION mode. The

command is applied in the same way as the

bandwidth-percentage command in an

output QoS policy. The bandwidth-percentage command in QOS-POLICY-OUT

mode supersedes the

service-class bandwidth-percentage command.

service-class dot1p-mapping

Configure a service-class criterion based on a dot1p value.

S6000–ON

Syntax

service-class dot1p-mapping {dot1p0 queue | dot1p1 queue | dot1p2

dot1p7 queue}

Parameters

queue Enter a value from 0 to 7.

Defaults For each dot1p Priority, the default CoS queue value is:

• Dot1p Priority : 0 1 2 3 4 5 6 7

• Queue : 2 0 1 3 4 5 6 7

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

Quality of Service (QoS) 1416