Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage Information By default, when rate policing and shaping, the system does not include the Preamble,
SFD, or the IFG fields. These fields are overhead; only the fields from MAC destination
address to the CRC are used for forwarding and are included in these rate metering
calculations.
service-class bandwidth-percentage
Specify a minimum bandwidth for queues.
S6000–ON
Syntax
service-class bandwidth-percentage queue0 number queue1 number
queue2 number queue3 number queue4 number queue5 number queue6
number queue7 number
Parameters
number Enter the bandwidth-weight, as a percentage.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Quality of Service (QoS) 1415