Users Guide

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command

Usage Information You cannot delete a terminal connection.

Commands

• access-class — restricts the incoming connections to a particular IP address in an

IP access control list (ACL).

• password — specifies a password for users on terminal lines.

Configures the limit of concurrent sessions for all users on console and virtual terminal lines.

Syntax

enable}

no login concurrent-session {limit number-of-sessions | clear—line

enable}

Parameters

limit number-of-

sessions

Sets the number of concurrent sessions that any user can have

on console and virtual terminal lines. The range is from 1 to 12

(10 VTY lines, one console, and one AUX line).

clear-line enable

Enables you to clear your existing sessions.

Defaults Not configured. You can use all the available sessions.

Command Modes CONFIGURATION

Control and Monitoring 126