Users Guide

Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information After you enable FTP server functions with the ftp-server enable command, Dell
Networking recommends specifying a top-level directory path. Without a top-level
directory path specified, the Dell Networking OS directs users to the flash directory
when logging in to the FTP server.
Related
Commands
• ftp-server enable — enables FTP server functions on the E-Series.
• ftp-server username — sets a username and password for incoming FTP
connections to the E-Series.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
Control and Monitoring 113