Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the E-Series.
Usage Information Dell Networking OS counts the SA messages originated by itself and those messages
received from the MSDP peers. When the total SA messages reach this limit, the
subsequent SA messages are dropped (even if they pass RPF checking and policy
checking).
If the total number of SA messages is already larger than the limit when this command
is applied, those SA messages that are already in Dell Networking OS continue to be
accepted. To enforce the limit in such situation, use the clear ip msdp sa-cache
command.
Related
Commands
• ip msdp peer — configure the MSDP peer.
• clear ip msdp peer — clear the MSDP peer.
• show ip msdp — display the MSDP information.
ip msdp shutdown
Administratively shut down a configured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Multicast Source Discovery Protocol (MSDP) 1119