Users Guide

Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.)
Defaults Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
6.2.1.1 Introduced
clear ip msdp sa-cache
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or
local source-active entries.
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format (A.B.C.D.).
rejected-sa Enter the keywords rejected-sa to clear the cache source-
active entries that are rejected because the RPF check failed, an
SA filter or limit is configured, the RP or MSDP peer is
unreachable, or because of a format error.
Multicast Source Discovery Protocol (MSDP) 1107