Setup Guide

Following is a sample conguration of RPM on an intermediate switch.
Conguring Remote Port Mirroring on a destination switch
Following is a sample conguration of RPM on an a destination switch.
Conguration Example of Remote Port Mirroring with ow-based enabled
This example provides a sample conguration of remote port mirroring with the ow based monitoring enabled.
Conguring Remote Port Mirroring on source switch
The below conguration example shows that the source is a source VLAN and the destination is the reserved VLAN (for example, remote-
vlan 20) with the ow based monitoring enabled.
Conguring Remote Port Mirroring on an intermediate switch
Following is a sample conguration of RPM on an intermediate switch.
Conguring Remote Port Mirroring on a destination switch
Following is a sample conguration of RPM on a destination switch.
Conguration Example of RPM for port-channel
This example provides a sample conguration of remote port mirroring for the port-channel source interface.
Conguring Remote Port Mirroring on source switch
The below conguration example shows that the source is a source port-channel and the destination is the reserved VLAN (for example,
remote-vlan 30).
Conguring Remote Port Mirroring on an intermediate switch
Following is a sample conguration of RPM on an intermediate switch.
Conguring Remote Port Mirroring on a Destination switch
Following is a sample conguration of RPM on a destination switch.
Port Monitoring
653