Setup Guide

CONFIGURATION mode
monitor session
monitor session type rpm/erpm
type is an optional keyword, required only for rpm and erpm
3 Specify the source and destination port and direction of trac, as shown in the following example.
MONITOR SESSION mode
source
Example of Viewing Port Monitoring Conguration
To display information on currently congured port-monitoring sessions, use the show monitor session command from EXEC
Privilege mode.
Figure 102. Port Monitoring Example
Conguring Monitor Multicast Queue
To congure monitor QoS multicast queue ID, use the following commands.
1 Congure monitor QoS multicast queue ID.
CONFIGURATION mode
monitor multicast-queue queue-id
DellEMC(conf)#monitor multicast-queue 7
2 Verify information about monitor congurations.
EXEC mode
EXEC Privilege mode
646
Port Monitoring