Setup Guide
3
INTERFACE mode
fefd {disable | interval | mode}
Example of Viewing FEFD Conguration
Debugging FEFD
To debug FEFD, use the rst command. To provide output for each packet transmission over the FEFD enabled connection, use the second
command.
• Display output whenever events occur that initiate or disrupt an FEFD enabled connection.
EXEC Privilege mode
debug fefd events
• Provide output for each packet transmission over the FEFD enabled connection.
EXEC Privilege mode
debug fefd packets
Examples of the debug fefd Commands
An RPM Failover
In the event that an RPM failover occurs, FEFD becomes operationally down on all enabled ports for approximately 8-10 seconds before
automatically becoming operational again.
484
Layer 2