Setup Guide
Figure 28. CoPP Implemented Versus CoPP Not Implemented
Congure Control Plane Policing
Conguring CoPP for Protocols
This section lists the commands necessary to create and enable the service-policies for CoPP.
For complete information about creating ACLs and QoS rules, refer to Access Control Lists (ACLs) and Quality of Service (QoS).
The basics for creating a CoPP service policy are to create a Layer 2, Layer 3, and/or an IPv6 ACL rule for the desired protocol type. Then,
create a QoS input policy to rate-limit the protocol tracs according to the ACL. The ACL and QoS policies are nally assigned to a control-
plane service policy for each port-pipe.
1 Create a Layer 2 extended ACL for control-plane trac policing for a particular protocol.
CONFIGURATION mode
mac access-list extended name cpu-qos
Control Plane Policing (CoPP)
231