Users Guide

Command Fields
Lines
Beginning
With
Description
Dell Network... Name of the operating system
Dell Operating... OS version number
Dell
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Networking
OS uptime is...
Amount of time the system has been up
System image... Image file name
System Type: System name
Control
Processor:...
Control processor information and amount of memory on processor
128K bytes... Amount and type of memory on system
1 Route
Processor...
Hardware configuration of the system, including the number and type of physical
interfaces available
Example (S6000)
Dell# show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-4(0-119)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Tue Mar 18 10:32:02 PDT 2014
Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/SRCC
Dell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)
System image file is "DT-MAA-S6000-16-PI"
System Type: S6000
Control Processor: Intel Centerton with 3203911680 bytes of memory,
core(s) 2.
16G bytes of boot flash memory.
1 32-port TE/FG (SI)
32 Forty GigabitEthernet/IEEE 802.3 interface(s)
Dell#
upgrade system
Upgrade the system image.
S6000
Syntax
upgrade system {flash: | ftp: | scp: | tftp: | usbflash: | stack-unit
{stack—unit—id | all} {A: | B:}
Parameters
stack–unit–id Enter the stack–unit–id to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member units of the stack.
ftp: Enter the keyword ftp to follow it with the location of the source file in this
form: //userid:password@hostip/filepath, or press Enter to launch a prompt
sequence.
File Management 73