Reference Guide

802.1X | 99
To disable MAB-only authentication on a port, enter the no dot1x auth-type
mab-only command.
Related
Commands
dot1x authentication (Configuration)
s
Enable dot1x globally; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on an globally, use the
no dot1x authentication command.
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
dot1x authentication (Interface)
s
Enable dot1x on an interface; dot1x must be enabled both globally and at the
interface level.
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
Related
Commands
dot1x mac-auth-bypass Enable MAC authentication bypass.
S6000
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
dot1x authentication (Interface) Enable dot1x on an interface.
S6000
Version 9.0.2.0 Introduced on S6000
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on S-Series
dot1x authentication (Configuration) Enable dot1x globally.