Reference Guide

952 | Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
Command
History
Usage
Information
To guarantee that a VRRP group becomes MASTER, configure the VRRP group’s virtual address with
same IP address as the interface’s primary IP address and change the priority of the VRRP group to
255.
If you set the priority to 255 and the virtual-address is not equal to the interface’s primary IP address,
an error message appears.
show config
z
View the non-default VRRP configuration.
Syntax
show config [verbose]
Parameters
Command Modes
VRRP
Command
History
Example
Figure 47-1. show config Command Example
FTOS(conf-if-vrid-4)#show con
vrrp-group 4
virtual-address 119.192.182.124
!
show vrrp
z
View the VRRP groups that are active. If no VRRP groups are active, the FTOS returns No Active
VRRP group
.”
Syntax
show vrrp [vrrp-id] [interface] [brief]
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on Z9000.
S6000
verbose (OPTIONAL) Enter the keyword verbose to view all VRRP group configuration
information, including defaults.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on Z9000.
S6000