Reference Guide

VLAN Stacking | 941
show interface dei-mark
Display the dei mark configuration.
Syntax
show interface dei-mark [interface slot/port | linecard number port-set number]
Parameters
Command Mode
EXEC Privilege
Command
History
Example
FTOS#show interface dei-mark
Default CFI/DEI Marking: 0
Interface Drop precedence CFI/DEI
------------------------------------------------
Gi 0/1 Green 0
Gi 0/1 Yellow 1
Gi 8/9 Yellow 0
Gi 8/40 Yellow 0
Related
Commands
stack-unit stack-group
Configure stacking group specified by ID.
Syntax
[no] stack-unit unit-id stack-group stack-group-id
Parameters
Defaults
N/A
Command Mode
CONFIGURATION
Command
History
S6000
interface slot/port Enter the interface type followed by the stack-unit slot and port
number.
linecard number port-set
number
Enter linecard followed by the stack-unit slot number, then enter port-set
followed by the port-pipe number.
Version 9.0.2.0 Introduced on S6000.
dei mark Set the DEI value on egress according to the color currently assigned to the
packet.
S6000
unit-id Enter the stack unit ID.
stack-group-id
Enter the stack group ID. Range is 0 to 16.
[no]
Use no stack-unit unit-id stack-group stack-id to remove the current stack
group configuration.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.10.2 Introduced on S4810