Reference Guide

936 | System Time and Date
www.dell.com | support.dell.com
show ntp status
s z
Display the current NTP status.
Syntax
show ntp status
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 45-7. show ntp status Command Example
FTOS#sh ntp sta
Clock is synchronized, stratum 2, reference is 100.10.10.10
frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290
reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000)
clock offset is clock offset msec, root delay is 0.01656 sec
root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec
peer mode is client
FTOS#
Related
Commands
S6000
Version 9.0.0.0 Added support for IPv6
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
Table 45-2. show ntp status Command Example Information
Field Description
“Clock is...” States whether or not the switch clock is synchronized, which NTP stratum
the system is assigned and the IP address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz)
of the clock in this system.
“reference time is...” Displays the reference time stamp.
“clock offset is...” Displays the system offset to the synchronized peer and the time delay on
the path to the NTP root clock.
“root dispersion is...” Displays the root and path dispersion.
“peer mode is...” State what NTP mode the switch is. This should be client mode.
show ntp associations Display information on NTP master and peer configurations.