Reference Guide

System Time and Date | 923
clock read-calendar
s z
Set the software clock on the switch from the information set in hardware clock (calendar).
Syntax
clock read-calendar
Defaults
Not configured.
Command Modes
EXEC Privilege
Command
History
Usage
Information
In the switch, the hardware clock is separate from the software and is called the calendar. This
hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS
automatically updates the software clock after system bootup.
You cannot delete this command (that is, there is not a “no” version of this command).
clock set
s z
Set the software clock in the switch.
Syntax
clock set time month day year
Parameters
Defaults
Not configured
Command Modes
EXEC Privilege
Command
History
Example
Figure 45-2. clock set Command Example
FTOS#clock set 16:20:00 19 may 2001
FTOS#
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
S6000
time
Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, example,
17:15:00 is 5:15 pm.
month
Enter the name of one of the 12 months, in English.
You can enter the number of a day and change the order of the display to
time day month
year.
day
Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the display to
time month day year.
year
Enter a four-digit number as the year.
Range: 1993 to 2035.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series