Reference Guide

92 | Control and Monitoring
www.dell.com | support.dell.com
Type Ctrl-C to abort.
------------------------------------------------------------------------------
-----------
packets
------------------------------------------------------------------------------
-----------
Hops Hostname Probe1 Probe2 Probe3
1 3ffe:501:ffff:100:201:e8ff:fe00:4c8b
000.000 ms 000.000 ms 000.000 ms
FTOS#
Tracing the route to 3ffe:501:ffff:100:201:e8ff:fe00:4c8b, 64 hops max, 60 byte
Related
Commands
undebug all
s z
Disable all debug operations on the system.
Syntax
undebug all
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
History
virtual-ip
Z
Configure a virtual IP for the active management interface.
Syntax
virtual-ip {ipv4-address | ipv6-address}
To return to the default, use the no virtual-ip {ipv4-address | ipv6-address} command.
Parameters
Defaults
No default behavior or values
ping Test connectivity to a device.
S6000
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
S6000
ipv4- address Enter the IP address of the active management interface in a dotted decimal
format (A.B.C.D.)
ipv6-address Enter an IPv6 address of the active management interface, in the x:x:x:x::x
format.
Note: The :: notation specifies successive hexadecimal fields of zeros.