Reference Guide

894 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging facility
s z
Configure the Syslog facility, used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, enter no logging facility.
Parameters
Defaults
local7
Command Modes
CONFIGURATION
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
clear logging Clear logging buffer.
default logging console Returns the logging console parameters to the default setting.
show logging Display logging settings and system messages in the internal buffer.
S6000
facility-type
(OPTIONAL) Enter one of the following parameters.
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.