Reference Guide

Simple Network Management Protocol and Syslog | 893
logging buffered
s z
Enable logging and specify which messages are logged to an internal buffer. By default, all messages
are logged to the internal buffer.
Syntax
logging buffered [level] [size]
To return to the default values, enter default logging buffered. To disable logging stored to an
internal buffer, enter no logging buffered.
Parameters
Defaults
level = 7; size = 40960 bytes
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
Related
Commands
logging console
s z
Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, enter default logging console. To disable logging to the console, enter
no logging console.
Parameters
Defaults
7 or debugging
S6000
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging.
Default: 7 or debugging.
size
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of
messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
clear logging Clear the logging buffer.
default logging buffered Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.
S6000
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.