Reference Guide

Simple Network Management Protocol and Syslog | 891
Related
Commands
default logging monitor
s z
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults
level = 7 or debugging
Command Modes
CONFIGURATION
Command
History
Related
Commands
default logging trap
s z
Return to the default settings for logging messages to the Syslog servers.
Syntax
default logging trap
Defaults
level = 6 or informational
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging
s z
Configure an IP address or host name of a Syslog server where logging messages will be sent.
Syntax
logging {ip-address | ipv6-address | hostname}
To disable logging, enter no logging.
logging console Set the logging console parameters.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
logging monitor Set the logging monitor parameters.
terminal monitor Send system messages to the terminal/monitor.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
logging trap Limit messages logged to the Syslog servers based on severity.
S6000