Reference Guide

876 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
Related
Commands
show snmp user
s z
Display the information configured on each SNMP user name.
Syntax
show snmp user
Command Modes
EXEC
EXEC Privilege
Example
Figure 42-4. show snmp user Command Example
FTOS#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
FTOS#
Command
History
snmp ifmib ifalias long
s z
Display the entire description string through the Interface MIB, which would be truncated otherwise to
63 characters.
Syntax
snmp ifmib ifalias long
Defaults
Interface description truncated beyond 63 characters
Command Modes
CONFIGURATION
Command
History
Example
Figure 42-5. snmp ifmib ifalias long Command Example
FTOS#config!------command run on host connected to switch: --------------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This
is a port connected to
IF-MIB::ifAlias.134792448 = STRING:
!------command run on Dell Networkingswitch: --------------!
FTOS#snmp ifmib ifalias long
snmp-server group Configure an SNMP server group
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series