Reference Guide

872 | sFlow
www.dell.com | support.dell.com
Gi 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1
FTOS#
Usage
Information
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the figure above will
always display a value of zero.
show sflow linecard
s z
Display the sFlow information on a stack-unit.
Syntax
show sflow linecard {slot number}
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 41-2. show sflow linecard Command Example
FTOS#show sflow linecard 1
Linecard 1
Samples rcvd from h/w :165
Samples dropped for sub-sampling :0
Total UDP packets exported :0
UDP packets exported via RPM :77
UDP packets dropped :
FTOS#
S6000
slot number
(OPTIONAL) Enter a slot number to view information on the stack-unit in that slot.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300.
Version 9.0.2.0 Introduced on S6000
Version 8.3.11.1 Introduced on Z9000
Version 7.7.1.0 Introduces on S-Series
This count is always zero (0)