Reference Guide

86 | Control and Monitoring
www.dell.com | support.dell.com
show tech-support (S-Series and Z-Series)
s z
Display a collection of data from other show commands, necessary for Dell Networking
technical support to perform troubleshooting on S-Series switches.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
Command Modes
EXEC Privilege
Command
History
S-Series
Examples
FTOS#show tech-support ?
page Page through output
stack-unit Unit Number
| Pipe through a command
<cr>
FTOS#show tech-support stack-unit 1 ?
| Pipe through a command
<cr>
FTOS#show tech-support stack-unit 1 | ?
except Show only text that does not match a pattern
find Search for the first occurrence of a pattern
grep Show only text that matches a pattern
no-more Don't paginate output
save Save output to a file
FTOS#show tech-support stack-unit 1 | save ?
flash: Save to local file system (flash://filename (max 20
chars) )
FTOS#show tech-support stack-unit 1 | save flash://LauraSave
Start saving show command report .......
FTOS#
FTOS#dir
Directory of flash:
S6000
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the
stack member designated by unit-id.
Unit ID range:
S4810: 0-11
all other S-Series: 0-7
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to filter
command output. Refer to Chapter 2, CLI Basics for details on filtering
commands.
save Enter the save keyword to save the command output.
flash:Save to local flash drive (flash://filename (max 20 chars) )
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
Version 7.8.1.0 Introduced save to file options
Version 9.0.2.0 Expanded to support S-Series switches