Reference Guide

840 | Security
www.dell.com | support.dell.com
dot1x server-timeout
s z
Configure the amount of time after which exchanges with the server time out.
Syntax
dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command History
dot1x supplicant-timeout
s z
Configure the amount of time after which exchanges with the supplicant time out.
Syntax
dot1x supplicant-timeout seconds
To return to the default, use the no dot1x supplicant-timeout command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command History
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.