Reference Guide

Security | 839
Command History
dot1x reauthentication
s z
Enable periodic re-authentication of the client.
Syntax
dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication command.
Parameters
Defaults
3600 seconds (1 hour)
Command Modes
INTERFACE
Command History
Related
Commands
dot1x reauth-max
s z
Configure the maximum number of times a port can re-authenticate before the port becomes
unauthorized.
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
Defaults
2
Command Modes
INTERFACE
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
interval seconds
(Optional) Enter the keyword interval followed by the interval time, in seconds,
after which re-authentication will be initiated.
Range: 1 to 31536000 (1 year)
Default: 3600 (1 hour)
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
interface range Configure a range of interfaces
S6000
number
Enter the permitted number of re-authentications.
Range: 1 - 10
Default: 2
Version 9.0.2.0 Introduced on the S6000.