Reference Guide

830 | Security
www.dell.com | support.dell.com
radius-server timeout
s z
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply
to a request.
Syntax
radius-server timeout seconds
To return to the default value, enter no radius-server timeout.
Parameters
Defaults
5 seconds
Command Modes
CONFIGURATION
Command History
Related
Commands
TACACS+ Commands
FTOS supports TACACS+ as an alternate method for login authentication.
• debug tacacs+
• ip tacacs source-interface
• tacacs-server host
• tacacs-server key
debug tacacs+
s z
View TACACS+ transactions to assist with troubleshooting.
Syntax
debug tacacs+
To disable debugging of TACACS+, enter no debug tacacs+.
Defaults
Disabled.
Command Modes
EXEC Privilege
S6000
seconds
Enter the number of seconds between an unsuccessful attempt and the FTOS times
out.
Range: zero (0) to 1000 seconds.
Default: 5 seconds.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.6.1.0 Support added for S-Series
radius-server host Configure a RADIUS host.
S6000