Reference Guide

824 | Security
www.dell.com | support.dell.com
Related
Commands
timeout login response
z
Specify how long the software will wait for login input (for example, user name and password) before
timing out.
Syntax
timeout login response seconds
To return to the default values, enter no timeout login response.
Parameters
Defaults
seconds = 300 seconds
Command Modes
LINE
Command History
Usage Information
The software measures the period of inactivity defined in this command as the period between
consecutive keystrokes. For example, if your password is “password” you can enter “p” and wait 29
seconds to enter the next letter.
username
z
Establish an authentication system based on user names.
Syntax
username name [access-class access-list-name] [nopassword | {password | secret}
[encryption-type] password] [privilege level]
If you do not want a specific user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
username Enable a user.
S6000
seconds
Enter a number of seconds the software will wait before logging you out.
Range: 1 to 300.
Default: 300 seconds.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000
name
Enter a text string for the name of the user up to 63 characters.
access-class
access-list-name
Enter the keyword access-class followed by the name of a configured access
control list (either a IP access control list or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user should not enter a password.
password Enter the keyword password followed by the encryption-type or the password.
secret Enter the keyword secret followed by the encryption-type or the password.