Reference Guide

822 | Security
www.dell.com | support.dell.com
Defaults
No default values or behavior
Command Modes
CONFIGURATION
Command History
Related
Commands
service password-encryption
z
Encrypt all passwords configured in FTOS.
Syntax
service password-encryption
To store new passwords as clear text, enter no service password-encryption.
Defaults
Enabled.
Command Modes
CONFIGURATION
Command History
Usage Information
To keep unauthorized people from viewing passwords in the switch configuration file, use the service
password-encryption command. This command encrypts the clear-text passwords created for user
name passwords, authentication key passwords, the privileged command password, and console and
virtual terminal line access passwords.
To view passwords, use the show running-config command.
character-restriction
(OPTIONAL) Enter the keyword character-restriction to indicate a
character restriction for the password.
upper number
(OPTIONAL) Enter the keyword upper followed the upper number.
Range: 0 - 31
lower number
(OPTIONAL) Enter the keyword lower followed the lower number.
Range: 0 - 31
numeric number
(OPTIONAL) Enter the keyword numeric followed the numeric number.
Range: 0 - 31
special-char number
(OPTIONAL) Enter the keyword special-char followed the number of
special characters permitted.
Range: 0 - 31
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
password Specify a password for users on terminal lines.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Caution: Encrypting passwords with this command does not provide a high level of security.
When the passwords are encrypted, you cannot return them to plain text unless you re-configure
them. To remove an encrypted password, use the no password password command.