Reference Guide

82 | Control and Monitoring
www.dell.com | support.dell.com
show software ifm
s z
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit
unit-ID | trace-flags}
Parameters
Defaults
None
ResSize Actual resident size of the process in memory
Size Process test, stack, and data size
Allocs Total dynamic memory allocated
Frees Total dynamic memory freed
Max Maximum dynamic memory allocated
Current Current dynamic memory in use
Table 4-2. Descriptions of show processes memory output
Field Description
S6000
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about
IFM clients.
ifagt number Enter the keyword ifagt followed by the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb followed by one of the following interface IDs followed
by the slot/port information to display interface control block information for
that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet.
• For a Port Channel interface, enter the keyword port-channel.
(Range:1– 128)
• For a 10G Ethernet interface, enter the keyword TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
• fastethernet for a Fast Ethernet interface
• loopback for a Loopback interface
• managementethernet for a Management Ethernet interface
• null for a Null interface
• vlan for a VLAN interface (Range: 1–4094, 1-2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display
IFM information for that unit.
Unit ID range:
S4810: 0-11
Note: This option is only available on S-Series.
trace-flags
Enter the keyword trace-flags to display IFM information for internal
trace flags.