Reference Guide

Security | 817
After configuring the aaa authentication login command, configure the login authentication command
to enable the authentication scheme on terminal lines.
Connections to the SSH server will work with the following login mechanisms: local, radius and
tacacs.
Related
Commands
access-class
z
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
Defaults
Not configured.
Command Modes
LINE
Command History
Related
Commands
enable password
z
Change the password for the enable command.
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type] password [level level]
command.
login authentication Apply an authentication method list to designated terminal lines.
password Create a password.
radius-server host Specify a RADIUS server host.
tacacs-server host Specify a TACACS+ server host.
S6000
access-list-name
Enter the name of an established IP Standard ACL.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
line Apply an authentication method list to designated terminal lines.
ip access-list standard Name (or select) a standard access list to filter based on IP address.
ip access-list extended Name (or select) an extended access list based on IP addresses or protocols.
S6000