Reference Guide

814 | Security
www.dell.com | support.dell.com
privilege level (LINE mode)
z
Change the access level for users on the terminal lines.
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level command.
Parameters
Defaults
level = 15
Command Modes
LINE
Command History
Authentication and Password Commands
This section contains the following commands controlling management access to the system:
• aaa authentication enable
• aaa authentication login
• access-class
• enable password
• enable restricted
• enable secret
• login authentication
• password
• password-attributes
• privilege level (CONFIGURATION mode)
• privilege level (LINE mode)
• service password-encryption
• show privilege
• show users
• timeout login response
• username
S6000
level level Enter the keyword level followed by a number for the access level.
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000