Reference Guide

78 | Control and Monitoring
www.dell.com | support.dell.com
DHCP0 ACL0 0 1 0 0 6
6 25 25
DHCP0 IPMGR0 0 0 0 0 0
0 25 25
DHCP0 IFMGR0 0 0 0 0 0
0 25 25
!--------------------------output truncated ---------------------------------!
Table 4-1 list the definitions of the fields.
Example 2
FTOS# show processes ipc flow-control rp2
[qid] Source->Dest Cur High #of #of #msg #msg Retr total
Len Mark to Retr Sent Ackd
--------------------------------------------------------------------
[1] unknown2->unknown2 0 0 0 0 0 0 3 3
[2] l2pm0->spanMgr0 0 2 0 0 2298 2298 25 25
[3] fvrp0->macMgr0 0 0 0 0 0 0 25 25
[4] l2pm0->fvrp0 0 2 0 0 1905 1905 25 25
[5] fvrp0->l2pm0 0 0 0 0 0 0 25 25
[6] stp0->l2pm0 0 0 0 0 0 0 25 25
[7] spanMgr0->macMgr0 0 0 0 0 0 0 25 25
[8] spanMgr0->ipMgr0 0 0 0 0 0 0 25 25
FTOS#
Example 3
FTOS#show processes ipc flow-control lp 10
Q Statistics on LP 10
TxProcess RxProcess Cur High Time Retries Msg Ack Aval
Max
Len Mark Out Sent Rcvd Retra
Retra
-------------------------------------------------------------------------------------
------
ACL_AGENT10 PIM0 0 0 0 0 0 0 20 20
ACL_AGENT10 PIM0 0 0 0 0 0 0 20 20
FRRPAGT10 FRRP0 0 0 0 0 0 0 30 30
IFAGT10 IFMGR0 0 1 0 0 1 1 8 8
LPDMACAGENT10 MACMGR0 0 0 0 0 0 0 25 25
FTOS#
Example 4
FTOS#show processes ipc flow-control
Table 4-1. Description of show processes ipc flow-control cp output
Field Description
Source QID /Tx Process Source Service Identifier
Destination QID/Rx Process Destination Service Identifier
Cur Len Current number of messages enqueued
High Mark Highest number of packets in the queue at any point of time
#of to / Timeout Timeout count
#of Retr /Retries Number of retransmissions
#msg Sent/Msg Sent/ Number of messages sent
#msg Ackd/Ack Rcvd Number of messages acknowledged
Retr /Available Retra Number of retries left
Total/ Max Retra Number of retries allowed