Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6000
771772773774775776777778779780
Router Information Protocol (RIP) | 779
Command Modes
ROUTER RIP
Command
History
router rip
z
Enter the ROUTER RIP mode to configure and enable RIP.
Syntax
router rip
To disable RIP, enter no router rip.
Defaults
Disabled.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To enable RIP, you must assign a network address using the network command.
Example
Figure 36-1. router rip Command Example
FTOS(conf)#router rip
FTOS(conf-router_rip)#
Related
Commands
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
network Enable RIP.
exit Return to the CONFIGURATION mode.