Reference Guide

778 | Router Information Protocol (RIP)
www.dell.com | support.dell.com
redistribute
z
Redistribute information from other routing instances.
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate command.
Related
Commands
redistribute ospf
z
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value]
[route-map map-name]
To disable redistribution, enter no redistribute ospf process-id [match external {1 | 2} | match
internal | metric metric-value] [route-map map-name] command.
Parameters
Defaults
Not configured.
S6000
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static Enter the keyword static to specify that information from static routes is redistributed.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
default-information
originate
Generate a default route for RIP traffic.
S6000
process-id
Enter a number that corresponds to the OSPF process ID to be redistributed.
Range: 1 to 65355.
match external {1
|
2}
(OPTIONAL) Enter the keywords
match external followed by the numbers 1
or 2 to indicated that external 1 routes or external 2 routes should be redistributed.
match internal (OPTIONAL) Enter the keywords match internal to indicate that internal
routes should be redistributed.
metric
metric-value
(OPTIONAL) Enter the keyword
metric followed by a number as the metric
value.
Range: 0 to16
route-map
map-name
(OPTIONAL) Enter the keyword route-map followed by the name of a
configured route map.