Reference Guide

768 | Router Information Protocol (RIP)
www.dell.com | support.dell.com
• router rip
• show config
• show ip rip database
• show running-config rip
• timers basic
• version
auto-summary
z
Restore the default behavior of automatic summarization of subnet routes into network routes. This
command applies only to RIP version 2.
Syntax
auto-summary
To send sub-prefix routing information, enter no auto-summary.
Default
Enabled.
Command Modes
ROUTER RIP
Command
History
clear ip rip
z
Update all the RIP routes in the FTOS routing table.
Syntax
clear ip rip
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command triggers updates of the main RIP routing tables.
debug ip rip
z
Examine RIP routing information for troubleshooting.
Syntax
debug ip rip [interface | database | events [interface] | packet [interface] | trigger]
To turn off debugging output, use the no debug ip rip command.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000