Reference Guide

Quality of Service (QoS) | 761
An input policy map with both Trust and Class-map configuration, the Class-map rules are ignored and
only the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column
will contain the size of the CAM space required for the Trust rule and not the Class-map rule.
threshold
s z
Specify the minimum and maximum threshold values for the configured WRED profiles.
Syntax
threshold min number max number max-drop-rate number
To remove the threshold values, use the no threshold min number max number max-drop-rate
number command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (config-wred)
Command
History
Usage
Information
Use this command to configure minimum and maximum threshold values for user defined profiles.
Additionally, use this command to modify the minimum and maximum threshold values for the
pre-defined WRED profiles. If you delete threshold values of the pre-defined WRED profiles, the
profiles will revert to their original default values.
S6000
min number Enter the keyword min followed by the minimum threshold number
depends on the platform.
Range: 1024 to 40000 KB
max number
Enter the keyword max followed by the maximum threshold number
depends on the platform.
Range: 1024 to 40000 KB
max-drop-rate number
Enter the keyword max-drop-rate followed by the maximum number of
packets for the WRED profile.
Range: 0-100 KB. S4810, S6000 and Z9000.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.