Reference Guide

Quality of Service (QoS) | 759
show qos wred-profile
s z
View the WRED profile details.
Syntax
show qos wred-profile wred-profile-name
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 35-10. show qos wred-profile Command Output (S4810)
FTOS#s6000#show qos wred-profile
Wred-profile-name min-threshold max-threshold max-drop-rate
wred_drop 0 0 100
wred_teng_y 238 2378 100
wred_teng_g 238 2378 50
wred_fortyg_y 238 2378 50
wred_fortyg_g 238 2378 25
ecn 594 5941 50
FTOS#
test cam-usage
z
Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set portpipe
number] | [all]}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
S6000
wred-profile-name
Enter the WRED profile name to view the profile details.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000
policy-map
Enter the policy map name.
stack-unit number
(OPTIONAL) Enter the keyword stack-unit followed by the
stack-unit slot number.
port-set portpipe number Enter the keyword port-set followed by the stack-unit’s port pipe
number.
Range: 0 or 1
stack-unit all (OPTIONAL) Enter the keywords linecard all to indicate all
stack-units. Range depends on platform