Reference Guide

758 | Quality of Service (QoS)
www.dell.com | support.dell.com
Example
Figure 35-8. show qos qos-policy-output (S4810)
FTOS#show qos qos-policy-output
Qos-policy-output Customer1
Wred green Customer
Wred Ecn
show qos statistics
s z
View QoS statistics.
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 35-9. show qos statistics wred-profile
FTOS#show qos statistics wred-profile
Interface Te 0/49
Drop-statistic Dropped Pkts
Green 134154
Yellow 41718998
Out of Profile 0
FTOS#
Related
Commands
S6000
wred-profile interface
Enter the keyword wred-profile and optionally one of the following
keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
interface
Enter one of the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
Version 8.3.8.0 WRED-profile supported on the S4810
clear qos statistics Clears counters as shown in show qos statistics