Reference Guide

Quality of Service (QoS) | 751
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
Defaults
Burst size is 100 KB. Granularity for rate is Mbps unless the kbps option is used.
Command Modes
QOS-POLICY-OUT
Command
History
Related
Commands
service-policy input
z
Apply an input policy map to the selected interface.
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input
policy-map-name [layer2] command.
Parameters
Defaults
Layer 3
Command Modes
INTERFACE
Command
History
kbps
Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On
S-Series make the following value a multiple of 64. The default granularity is
Megabits per second (Mbps).
Range: 0 to 40000.
rate
Enter the outgoing rate.
Range: 0 to 10000
burst-KB
(OPTIONAL) Enter a number as the burst size in KB.
Range: 0 to 40000
Default: 100
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
Version 8.3.8.0
Added
kbps option on S- Series.
rate shape Shape the traffic output of the selected interface.
qos-policy-output Create a QoS output policy.
S6000
policy-map-name
Enter the name for the policy map in character format (16 characters
maximum).
You can identify an existing policy map or name one that
does not yet
exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map.
Default: Layer 3
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.