Reference Guide

746 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map is
identified, you can configure the match criteria.
Related
Commands
match mac dot1p
s z
Configure a match criterion for a class map, based on a dot1p value.
Syntax
match mac dot1p {dot1p-list}
Parameters
Defaults
No default values or behavior
Command Modes
CLASS-MAP
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map is
identified, you can configure the match criteria.
Related
Commands
match mac vlan
z
Configure a match criterion for a class map based on VLAN ID.
Syntax
match mac vlan number
Parameters
Defaults
None
Command Modes
CLASS-MAP
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
Version 7.5.1.0 Added support for DSCP Marking option
class-map Identify the class map.
S6000
dot1p-list
Enter a dot1p value.
Range: 0 to 7
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
Version 7.5.1.0 Added support for DSCP Marking option
class-map Identify the class map.
S6000
number
Enter the VLAN ID.
Range: 1 to 4094