Reference Guide

734 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION
Command
History
service-class bandwidth-percentage
Specify a minimum bandwidth for queues
Syntax
service-class bandwidth-percentage queue0 number queue1 number queue2 number
queue3 number queue4 number queue5 number queue6 number queue7 number
Parameters
Defaults
None
Command Modes
CONFIGURATION
Command
History
Usage
Information
Guarantee a minimum bandwidth to different queues globally using the command service-class
bandwidth-percentage from CONFIGURATION mode. The command is applied in the same way as
the bandwidth-percentage command in an output QoS policy. The bandwidth-percentage command
in QOS-POLICY-OUT mode supersedes the service-class bandwidth-percentage command.
service-class dot1p-mapping
This command maps on 802.1p priority to an internal queue value.
Syntax
service-class dot1p-mapping dot1p0 queue dot1p1 queue dot1p2 queue dot1p3 queue
dot1p4 queue dot1p5 queue dot1p6 queue dot1p7 queue
Parameters
Command Modes
CONFIGURATION
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000
number
Enter the bandwidth-weight, as a percentage.
Range 1-100.
Version 9.0.2.0 Introduced on S6000
S6000
queue
Enter a value from 0 to 7.
dot1p Queue Number(S6000)
0 0-7
1 0-7
2 0-7
3 0-7
4 0-7
5 0-7
6 0-7
7 0-7