Reference Guide

Per-VLAN Spanning Tree Plus (PVST+) | 731
Parameters
Defaults
20 seconds
Command Modes
CONFIGURATION (conf-pvst)
Command
History
Related
Commands
vlan vlan-range Enter the keyword vlan followed by the VLAN number(s).
Range: 1 to 4094
max-age seconds Enter the keyword max-age followed by the time interval, in seconds, that
FTOS waits before refreshing configuration information.
Range: 6 to 40 seconds
Default: 20 seconds
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
vlan bridge-priority Set the bridge-priority value
vlan forward-delay Change the time interval before FTOS transitions to the forwarding state
vlan hello-time Change the time interval between BPDUs
show spanning-tree pvst Display the PVST+ configuration