Reference Guide

730 | Per-VLAN Spanning Tree Plus (PVST+)
www.dell.com | support.dell.com
Command
History
Related
Commands
vlan hello-time
z
Set the time interval between generation of PVST+ Bridge Protocol Data Units (BPDUs).
Syntax
vlan vlan-range hello-time seconds
To return to the default value, enter no vlan hello-time command.
Parameters
Defaults
2 seconds
Command Modes
CONFIGURATION (conf-pvst)
Command
History
Related
Commands
vlan max-age
z
Set the time interval for the PVST+ bridge to maintain configuration information before refreshing that
information.
Syntax
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
vlan bridge-priority Set the bridge-priority value
vlan hello-time Change the time interval between BPDUs
vlan max-age Change the time interval before PVST+ refreshes
show spanning-tree pvst Display the PVST+ configuration
S6000
vlan vlan-range Enter the keyword vlan followed by the VLAN number(s).
Range: 1 to 4094
hello-time seconds Enter the keyword hello-time followed by the time interval, in seconds,
between transmission of BPDUs.
Range: 1 to 10 seconds
Default: 2 seconds
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
vlan bridge-priority Set the bridge-priority value
vlan forward-delay Change the time interval before FTOS transitions to the forwarding state
vlan max-age Change the time interval before PVST+ refreshes
show spanning-tree pvst Display the PVST+ configuration
S6000