Reference Guide

724 | Per-VLAN Spanning Tree Plus (PVST+)
www.dell.com | support.dell.com
Related
Commands
show spanning-tree pvst
z
View the Per-VLAN Spanning Tree configuration.
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [Interface]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 34-2. show spanning-tree pvst brief Command
FTOS#show spanning-tree pvst vlan 3 brief
VLAN 3
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 4096, Address 0001.e801.6aa8
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 16384, Address 0001.e805.e306
Configured hello time 2, max age 20, forward delay 15
disable Disable PVST+.
show spanning-tree pvst Display the PVST+ configuration.
S6000
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID.
Range: 1 to 4094
brief (OPTIONAL) Enter the keyword brief to view a synopsis of the PVST+
configuration information.
Interface
(OPTIONAL) Enter one of the interface keywords along with the slot/port
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For Port Channel groups, enter the keyword
port-channel followed
by a number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000.
Version 6.4.1.0 Expanded to display port error disable state (EDS) caused by loopback BPDU
inconsistency and Port VLAN ID inconsistency.
Version 6.2.1.1 Introduced