Reference Guide

72 | Control and Monitoring
www.dell.com | support.dell.com
show processes cpu (S-Series)
s z
Display CPU usage information based on processes running in an S-Series.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit id | summary |
ipc | memory [stack-unit
id]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
FTOS#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit0 0% 0% 0%
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit1* 1% 0% 0%
Unit2 0% 0% 0%
Unit3 0% 0% 0%
* Mgmt Unit
Example 2
FTOS#show processes cpu management-unit 0
S6000
management-unit1-99
[details]
(OPTIONAL) Display processes running in the control processor.
The 1-99 variable sets the number of tasks to display in order of the
highest CPU usage in the past five (5) seconds. Add the details
keyword to display all running processes (except sysdlp). See
Example 3.
stack-unit id (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID.
As an option of show processes cpu, this option displays CPU
usage for the designated stack member. See Example 2.
Or, as an option of memory, this option limits the output of
memory statistics to the designated stack member. See Example 5.
Unit ID range:
S4810: 0-11
summary (OPTIONAL) Enter the keyword summary to view a summary
view of CPU usage for all members of the stack. See Example 1.
ipc (OPTIONAL) Enter the keyword ipc to display inter-process
communication statistics.
memory (OPTIONAL) Enter the keyword memory to display memory
statistics. See Example 4.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
Version 7.7.1.0 Modified: Added management-unit [details] keywords.