Reference Guide

714 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Related
Commands
private-vlan mapping secondary-vlan
s z
Map secondary VLANs to the selected primary VLAN.
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
Parameters
Defaults
none
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
show interfaces private-vlan
s
Display type and status of PVLAN interfaces.
private-vlan mapping
secondary-vlan
Set the mode of the selected VLAN to primary and then associate
secondary VLANs to it.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan Display PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
S6000
vlan-list
Enter the list of secondary VLANs to associate with the selected primary VLAN, as described
above. The list can be
in comma-delimited or hyphenated-range format, following the
convention for range input.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
private-vlan mode Set the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan Display PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan
mapping
Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
S6000